The quote was one number and the bill was another. In rental reviews, that gap almost always comes from the same two places: fuel and mileage. Neither is a scam — both are real costs of running a truck — but both are easy to misunderstand at the counter, and a misunderstanding is what turns into a dispute. This guide explains how fuel and mileage charges actually work, what the old mileage terms meant, and the three questions to ask before you book so the bill matches the quote. Our guide to fuel surcharges and mileage fees covers the basics; this one goes into the detail that keeps the surprise off your bill.
How the fuel charge works
A rental truck leaves the yard with a known fuel level and comes back with whatever is left. If it comes back with less, the yard charges for the difference — that is the fuel charge, and it is separate from the rental rate. The argument is never about whether fuel costs money. It is about how much was in the tank when you took it. That is why the gauge photograph matters: before you drive off, photograph the fuel gauge with the dashboard in frame, and photograph the fuel level written on your paperwork next to it. If the two do not match, say so at the counter and get the paperwork corrected before you leave — a gauge that reads three-quarters while the paperwork says full is a charge waiting to happen. Take the same photograph when you bring the truck back, with the gauge and the time visible. The full version of this is in our 10-minute walkaround guide, and it is the single most useful photograph in truck rental.
The mileage allowance: what the 100 free miles meant
Older rental terms from this business included 100 free miles on a rental, then a per-mile charge after that — a historical term, not today’s rate. The idea behind it is still how mileage works everywhere: a rental includes a certain amount of driving, and driving beyond it costs more, because every mile is fuel, tyres and wear on the truck. The practical point for you is not the old number. It is the question to ask when you book: how many miles are included, what happens after that, and how is the mileage counted — odometer at pickup and return, or something else? A dump run to Tacoma and back is a different number of miles from a week of hauling across the county, and the quote should reflect the job you described. If your job changes after you book — an extra dump run, a second site — tell the yard when it changes, not when the truck comes back.
Refuel or pay the yard rate
When the truck comes back low on fuel, you usually have two choices: refuel it yourself before you return it, or pay the yard to refuel it. Refuelling it yourself is almost always cheaper, because the yard’s rate includes the fuel plus the time and the trip to the station. The catch is the same as everything else in this guide: the paperwork has to match the gauge. If you refuel to the level on the paperwork and the gauge still reads short, photograph both and say so at the counter — do not just hand the keys over and hope the paperwork agrees with you. And plan the refuel into the return: the nearest station to the yard is not always on your route home, and a truck that arrives back with the needle on empty is a truck that gets charged for fuel whether you meant to refuel it or not.

The three questions to ask when you book
Three questions, asked before you book, remove almost every fuel and mileage surprise. First: how many miles are included in the rate, and what is charged after that? Second: what fuel level does the truck leave with, and what level does it need to come back with? Third: if the job runs long — an extra day, an extra dump run — what changes, and who do I call to extend it? Get the answers in writing on the reservation, with the rate confirmed by phone before you book. A quote that answers all three is a quote you can trust. A quote that answers none of them is a quote that will grow. For the rental rates themselves, our guide to dump truck rental cost covers day, week and month rates.

Frequently asked questions
Why was my bill higher than the quote?
Usually fuel or mileage: the truck came back with less fuel than it left with, or the job drove further than the included miles. Both are charged separately from the rental rate. Ask for the fuel and mileage lines on the bill, and compare them with the gauge photographs and the odometer readings from pickup and return.
What is a fuel surcharge?
A charge for the fuel used beyond what was in the tank at pickup — or, in some rentals, a separate line that covers fuel-price movement during the rental. Either way, it should be explained before you book, not discovered on the bill. Ask what it covers when you get the quote.
How do I avoid a fuel charge?
Photograph the gauge at pickup and at return, check that the paperwork matches the gauge before you leave, and refuel the truck yourself before you bring it back — to the level on the paperwork, with the gauge photograph to prove it.
Do trailers have fuel and mileage charges?
A trailer has no engine and no fuel tank, so there is no fuel charge on the trailer itself — but the pickup towing it burns the fuel, and the mileage is yours. The trailer’s own charges are the rental rate and any damage, not fuel. The walkaround still applies: check the tyres, the hitch and the lights before you tow.
Call or text (253) 318-2428 to rent a truck. Tell us what you are hauling, how far the job goes, and the dates — we will confirm the rate, the included miles and the fuel level before you book. Our yard at 17519 Canyon Rd E, Puyallup, WA 98375 is open 24/7.