Fuel Surcharges and Mileage Fees Explained

Christopher
11 Min Read

Two charges catch first-time renters by surprise: the mileage fee and the fuel. Both are simple once you know how they work. This guide explains what a mileage fee is, how the 100 free miles a day rule worked here, what fuel costs you, and four ways to keep the total low. The one number that matters most: our rate — including what’s included in it — is confirmed by phone. Call or text (253) 318-2428 with the size and the dates, and we will confirm the rate before you book. For the full picture on what a rental costs, our guide to dump truck rental cost covers day, week and month rates.

What a mileage fee is

A mileage fee is what you pay for the miles beyond what’s included in the rental: most rentals include a set number of free miles a day, and the miles after that are charged per mile. A short local job and a long haul should not cost the same, because fuel, wear and time all grow with distance. In the wider market today, mileage surcharges run about $0.25 to $0.65 a mile. Those are other companies’ published rates, shown as context, not our prices. What matters for your bill is three things: how many free miles your rental includes, what the per-mile rate is after that, and how far your job actually takes you — there and back, not just there.

The 100 free miles a day rule

Historically, every rental here included 100 free miles a day, then $0.50 a mile after that. Those are historical terms, labelled as such — not today’s terms, because no current price list has been approved for this site. But the shape of it is how mileage works here: a generous daily allowance that covers most local jobs, and a per-mile charge only beyond it. A day’s work inside Tacoma and Pierce County — yard to job, job to dump, dump back to the yard — usually fits inside 100 miles. The miles that add up are the long ones: a far-corner job, a second dump run, or a delivery far from the yard. Tell us where the job and the load are going when you call, and we will confirm the mileage before you book.

What counts as a mile

The miles that count are the miles the truck travels while it is out on your rental — from the yard to your job, to the dump, and back to the yard. Short moves around a job site are part of the job, not the journey. Add up the round trip. The yard is at 17519 Canyon Rd E, Puyallup, WA 98375, and the load usually goes to the Tacoma Recovery & Transfer Center at 3510 S. Mullen St — a short run across town. A job in Tacoma with one dump run is a small number of miles. A job with two or three dump runs, or a job far from Puyallup, is where the total grows. If you are unsure, tell us the addresses when you call and we will work it out with you.

Red dump truck, front view, Truck Rentals Co.

Fuel: whose fuel is it?

Fuel is the renter’s cost. You bring the fuel and the driver — that has always been the deal with a self-drive rental, trailer or truck. The truck goes out with fuel in it, and you pay for what you burn. A loaded dump truck burns far more fuel than an empty pickup, so a day of hauling dirt burns more than a day of light loads. What that means in practice: the bigger the truck and the heavier the load, the more fuel matters to the total. If you want a fuel estimate for your job, tell us the truck, the load and the distance when you call — we will give you an honest sense of it before you book.

The fuel-gauge dispute — and the photograph that ends it

The most argued-over fuel charge in rental reviews is not the price of fuel. It is the gauge. A customer fills the tank minutes before returning the truck, hands back the keys, and is charged a fuel fee anyway — because the gauge read a needle short of full, or because nobody inspected the truck at drop-off and the charge was added later from the paperwork alone. The same story repeats across the big chains: a tank filled, a gauge that read 15/16, a fee charged with no inspection.

It is easy to stop, and it takes about a minute at each end of the rental.

At pickup, before you drive off, photograph the fuel gauge with the ignition on so the needle shows, and photograph the dashboard showing the mileage. Ask the person handing you the keys to write the fuel level on the rental agreement — “full”, or the exact fraction — and initial it. At return, do the same thing again: fill the tank, photograph the gauge with the ignition on, and ask staff to note the level on the agreement in front of you, before you hand back the keys. If nobody is there to receive the truck, photograph the gauge, the pump receipt, and the truck parked where you left it, and send the photographs by text or email the same day so there is a timestamped record.

That is also why the walkaround matters before you drive off: a gauge reading and a condition note made at pickup turn a later dispute about fuel or damage into a photograph instead of an argument. The same rule applies to the mileage — the odometer photograph you take at pickup is the start of the count, and the one at return is the end of it.

Dump truck at a fuel pump.

Four ways to keep the total down

First, keep the job close: one dump run to the Transfer Center costs far less in miles than two runs to two sites, so plan the load for one trip where you can. Second, pick the right size — a 5-yard truck costs more to run than a 12-foot dump, because it carries more and burns more. Third, load once and load well: an evenly loaded bed means fewer trips, and fewer trips mean fewer miles. Fourth, ask about the week. Dump trucks rent by the day first, but the longer you keep one, the cheaper each day — historically, a week ran about four times the day rate. If your job spans three or four days, a weekly rate may beat three or four single days. And if a trailer would do the job for less, our guide to dump trailer rental covers the trailer side of the same question — you bring the tow vehicle, the fuel and the driver, and the trailer itself costs less to run.

Frequently asked questions

How many free miles do I get?

Historically, every rental here included 100 free miles a day. Those are historical terms — today’s terms are confirmed by phone. Call or text (253) 318-2428 with the size and the dates and we will confirm what is included before you book.

What happens after 100 miles?

Historically, miles beyond the daily allowance were $0.50 a mile. In the wider market today, mileage surcharges run about $0.25 to $0.65 a mile. Those are other companies’ rates, shown as context. Today’s per-mile rate here is confirmed by phone.

Do I pay for fuel separately?

Yes — fuel is the renter’s cost on a self-drive rental. The truck goes out with fuel in it and you pay for what you burn. A loaded dump truck burns far more fuel than an empty pickup, so the bigger the truck and the heavier the load, the more fuel matters.

Do mileage fees apply to trailers too?

A trailer has no engine, so there is no fuel to burn — but the tow vehicle is yours, so the miles are yours too. The trailer itself costs less to run because you bring the tow vehicle, the fuel and the driver.

What if they charge me for fuel after I filled the tank?

Photograph the fuel gauge with the ignition on at pickup and again at return, keep the pump receipt, and ask staff to write the fuel level on the rental agreement at both ends. If a fee still appears, those photographs and the receipt are what you show them — a gauge reading on paper beats a memory of one.

Call or text (253) 318-2428 to rent a dump truck. Tell us what you are hauling, which truck you need, the dates and where the job is — we will confirm the rate, the mileage and the fuel picture before you book. Our yard at 17519 Canyon Rd E, Puyallup, WA 98375 is open 24/7.

Share This Article
Leave a comment